High Build, Fast Cure Pipeline Coating
A VOC free, 100% solids, two-part epoxy coating specially formulated to complement FBE coated pipe. A high build liquid coating that can be brushed or sprayed applied in a shop or in the field up to 60 mils in one coat.

High Temperature, Pipeline Coating
A VOC free, 100% solids, two-part epoxy coating for pipelines operating at temperatures up to 250°F (121°C) with intermittent temperatures up to 300°F (150°C). Cures fast to allow for quick backfill when applied to substrates with higher temperatures.

Convenient sized cartridges for Protal products. Denso provides cartridges in a range of sizes from 50ml to 825ml for repair and 1000ml for spray. To be used for spray applications or repairs.

Multi-purpose, surface tolerant (wet & dry), moisture resistant petrolatum wax tape for corrosion prevention of steel pipes and fittings in low-temperature environments down to -40˚F (-40˚C).

A protective fiberglass outerwrap with exceptional mechanical and impact strength for underwater, underground, and above ground pipe and piles.

A 100% solids, non-hardening, thick butyl-based sealant tape with aggressive surface tack and high tensile strength.

A petrolatum tape with HDPE backing for marine environment use. Uneffected by water, acid or salts. Protects timber, steel & concrete piles, submerged pipe and other surfaces in contact with water.

A polymer modified bitumen strip for sealing cold joints with hot asphalt to asphalt, concrete or steel in road repair or construction. DensoBand forms a flexible watertight seal which allows for road movement from traffic load and thermal changes thereby preventing cracking and the subsequent failure of the joint.

A cold applied, polymer modified bituminous sealing strip that is applied vertically to create a tough, uniform, waterproof seal. For sealing joints between existing asphalt and new asphalt installations. Used in conjunction with primer. Adheres to asphalt, concrete and steel.

Fast Cure, Low Temperature Pipeline Coating
Formulated to be applied to colder substrates at cooler ambient temperatures (-20°C to 20°C). A high build liquid coating that is brush applied in one coat to many areas during winter applications.

Moisture Tolerant Pipeline Liquid Coating
A VOC free, 100% solids, two-part epoxy coating specially formulated to coat dry, damp or wet surfaces. Can be applied to sweating pipelines above or below ground.

A heavy-duty, sacrificial Abrasion Resistant Outerwrap (ARO) for trenchless pipeline installations, severe handling or installations in difficult terrain.

A high adhesive tape petrolatum tape for the protection of above ground steelwork.

A cold applied, conformable petrolatum tape for the protection of metal pipes operating at elevated service temperatures.

Viscotaq is the ultimate visco-elastic amorphous a-polar polyolefin for the protection against corrosion of underground and aboveground substrates in the pipeline, petrochemical, water industry and more. The patented Viscotaq systems are self-healing, non-toxic, easy to apply, are 100% impermeable to water and oxygen, and require no primer.

Provide a smooth profile to minimal prepared surfaces and can quickly be applied to provide an effective water tight seal. Accommodates movement and vibrations underground to help ensure corrosion prevention.
Suitable for flanged joints, flanges, valves, couplings, nuts & bolts, irregular shaped fittings and more.

A specially formulated primer for preparing the surface of concrete, asphalt or steel for the application and good adhesion of Denso road maintenance products.

Easily applied to quickly provide an adhesive to hold the appropriate Denso asphalt tape in place until the installation of the top lift of hot mix asphalt. Convenient and portable and can be used when he substrate is clean but cold, to ensure good adhesion prior to the asphalt placement.